Vlan Trunk Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
OUI Address
Mask
Description
Click the Apply button to accept the changes made.
Click the Delete All button to remove all the user-defined entries listed.
Click the Edit button to re-configure the specific entry.
Click the Delete button to remove the specific entry.
Voice VLAN Device
This window is used to show voice devices that are connected to the ports. The start time is the time when the
device is detected on this port, the activate time is the latest time saw the device sending the traffic.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN Device, as show below:
The fields that can be configured are described below:
Parameter
Unit
Voice VLAN LLDP-MED Voice Device
This window displays the voice VLAN LLDP-MED voice devices connected to the Switch.
To view the following window, click L2 Features > VLAN > Voice VLAN > Voice VLAN LLDP-MED Voice Device,
as show below:
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

VLAN Trunk Settings

Enable VLAN on a port to allow frames belonging to unknown VLAN groups to pass through that port. This is useful
if you want to set up VLAN groups on end devices without having to configure the same VLAN groups on
intermediary devices.
Suppose you want to create VLAN groups 1 and 2 (V1 and V2) on devices A and B. Without a VLAN Trunk, you
must first configure VLAN groups 1 and 2 on all intermediary switches C, D and E; otherwise they will drop frames
Description
User defined OUI MAC address.
User defined OUI MAC address mask.
The description for the user defined OUI.
Figure 4-22 Voice VLAN Device window
Description
Select the unit you wish to configure.
Figure 4-23 Voice VLAN LLDP-MED Voice Device window
82