Mld Proxy - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Click the Clear Counter button to clear all the information displayed in the fields.
Click the Refresh button to refresh the display table so that new information will appear.
Click the <<Back button to return to the previous page.
IGMP Snooping Forward Lookup Mode Settings
This window is used to configure the IGMP Snooping forwarding mode settings.
To view the following window, click L2 Features > L2 Multicast Control > IGMP Snooping > IGMP Snooping
Forward Lookup Mode Settings, as show below:
The fields that can be configured are described below:
Parameter
Forward Lookup
Mode
Click the Apply button to accept the changes made.

MLD Proxy

Figure 4-60 Browse IGMP Snooping Counter window
Figure 4-61 IGMP Snooping Forward Lookup Mode Settings window
Description
Select the appropriate IGMP Snooping forwarding lookup mode here.
IP Address - Specifies that the multicast forwarding lookup will be based on the IP
address.
MAC Address - Specifies that the multicast forwarding lookup will be based on the
MAC address
113