Snmp Community Encryption Settings; Snmp Community Masking Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Trap
RMON Falling Alarm
Trap
Click the Apply button to accept the changes made.

SNMP Community Encryption Settings

This window is used to enable or disable the encryption state on the SNMP community string.
To view the following window, click Management > SNMP Settings > SNMP Community Encryption Settings,
as show below:
The fields that can be configured are described below:
Parameter
SNMP Community
Encryption State
Click the Apply button to accept the changes made.

SNMP Community Masking Settings

This window is used to choose a security method for creating an SNMP community string, but the community string
encrypted or not depends on the SNMP community encryption state.
To view the following window, click Management > SNMP Settings > SNMP Community Masking Settings, as
show below:
The fields that can be configured are described below:
Parameter
View Name
Access right
Enter a case-sensitive
community
Enter the community
again for confirmation
Click the Apply button to accept the changes made.
Enable this option to use the RMON Falling Alarm Trap Feature.
Figure 3-47 SNMP Community Encryption Settings window
Description
Click the Enabled or Disabled radio button to enable or disable the encryption.
Figure 3-48 SNMP community Maskking Settings window
Description
Use the drop-down menu to choose the MIB view name.
Use the drop-down menu to select the access right for the user using the
community string. Available options are Read Only and Read Write.
Enter a case-sensitive community string.
Retype the community string for confirmation.
60