Ipv4 Route Table; Ipv6 Static/Default Route Settings - D-Link xStack DGS-3420 Series Reference Manual

xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
Gateway
Metric (1-65535)
Backup State
Null Interface
Click the Apply button to accept the changes made.

IPv4 Route Table

The IP routing table stores all the external routes information of the switch. This window displays all the external
route information on the Switch.
To view the following window, click L3 Features > IPv4 Route Table, as show below:
The fields that can be configured are described below:
Parameter
Network Address
IP Address
RIP
Hardware
Click the Find button to locate a specific entry based on the information entered.
Enter a page number and click the Go button to navigate to a specific page when multiple pages exist.

IPv6 Static/Default Route Settings

A static entry of an IPv6 address can be entered into the Switch's routing table for IPv6 formatted addresses.
To view the following window, click L3 Features > IPv6 Static/Default Route Settings, as show below:
This field allows the entry of a Gateway IP Address to be applied to the corresponding
gateway of the IP address.
Represents the metric value of the IP interface entered into the table. This field may read
a number between 1 and 65535.
Each IP address can only have one primary route, while other routes should be assigned
to the backup state. When the primary route failed, switch will try the backup routes
according to the order learnt by the routing table until route success. The field represents
the Backup state that the Static and Default Route is configured for.
Use the drop-down menu to enable or disable the null interface as the next hop.
Figure 5-2 IPv4 Route Table window
Description
Enter the destination network address of the route want to be displayed.
Enter the destination IP address of the route want to be displayed. The longest prefix
matched route will be displayed.
Tick the check box to display only RIP routes.
Tick the check box to display only the routes that have been written into the chip.
160