xStack® DGS-3420 Series Layer 2 Managed Stackable Gigabit Switch Web UI Reference Guide
The fields that can be configured are described below:
Parameter
Unit
From Port / To Port
State
Click the Apply button to accept the changes made.
CFM MIPCCM Table
This window is used to display CFM MIPCCM information.
To view this window, click OAM > CFM > CFM MIPCCM Table, as shown below:
CFM Loopback Settings
This window is used to CFM loopback settings.
To view this window, click OAM > CFM > CFM Loopback Settings, as shown below:
Figure 10-10 CFM Port Settings Window
Description
Select the unit you wish to configure.
Use the drop-down menu to select a range of ports used for this configuration.
Use the drop-down menu to enable or disable the state of specific port regarding the
CFM configuration.
Figure 10-11 CFM MIPCCM Table Window
343