Description - Intermec EasyCoder PX4i User Manual

Chapter 6 — Setting Up the Printer

Description

58
The setup controls the printer in regard of serial communication,
test and service operations, and specifies which types of media
and ribbon are loaded in the printer.
Check the list below to see if the printer's default setup matches
your requirements. If not, you will have to change the setup. To
enter the Setup Mode, press the <Setup> key on the printer's
built-in keyboard and follow the instructions in Chapter 7,
"Setup Mode" on page 71.
EasyCoder PX4i User's Guide (IPL Version)