Data Dump - Intermec EasyCoder PX4i User Manual

Chapter 6 — Setting Up the Printer
64
Test Labels
This option has two choices, Pitch and Print Quality.
• The Pitch label contains an even pattern of small dots that
reveals failing printhead dots and variations of printout
darkness because of uneven printhead pressure or bad energy
regulation to the printhead.
• The Print Quality label contains number of bar codes with
different characteristics and useful information on printer
model, program version, print speed, and media sensitivity
setup.
Format
The Format Label contains a single format that you can use to
evaluate the print quality of a particular format. This option
prints labels for all the formats stored in the printer's memory.
Page
The Page Label tests the ability of the printer to receive and print
single or multiple pages of label data that is sent from the host.
This option prints labels for all the pages stored in the printer's
memory.
UDC
The UDC Label tests the ability of the printer to receive and
print single or multiple user-defined characters (bitmap graphics)
that are sent from the host. This option prints labels for all the
UDCs stored in the printer's memory.
Font
The Font Label contains all the characters in a single font. This
option prints labels for all the user-defined fonts (UDF) stored in
the printer's memory.

Data Dump

If data dump is enabled by selecting the "Yes" option, the printer
prints all data and protocol characters received on the serial port.
An ASCII and hexadecimal representation of each character is
printed.
EasyCoder PX4i User's Guide (IPL Version)