Introduction Description; Appendix - Intermec EasyCoder F2 Installation & Operation Manual

Chapter 1
Introduction
Description
6
The EasyCoder F2 is a sturdy medium-duty direct thermal/thermal
transfer printer with a printhead resolution of 8 dots per mm
(203.2 dots per inch) and a maximum print width of 56 mm (2.2
inches).
The EasyCoder F2 is delivered with the Intermec Programming
Language (IPL-3) installed. There is also a version of the EasyCoder
F2 that uses the Intermec Fingerprint Programming Language.
Mechanically, the IPL version is identical to the Intermec Fingerprint
version, but a few options are not supported by IPL-3, for example:
• Optional double serial and industrial interface boards
• Electronic keys
• Memory cards (except for fi rmware upgrading)
• EasySet Bar Code Wand
• Real Time Clock Circuit
In most respects, the EasyCoder F2 IPL version is compatible with
other IPL printers from Intermec. Please refer to Appendix 4 for a
list of supported IPL-3 commands.
Intermec EasyCoder F2 – Installation & Operation IPL Version, Ed. 1