Usb Interface - Intermec EasyCoder PX4i User Manual

USB Interface

EasyCoder PX4i User's Guide (IPL Version)
This printer supports USB v1.1 (also called USB 2.0 full speed).
To use the USB interface for printing from a PC, you need a
special Intermec USB printer driver installed in your PC.
The printer is a so-called "self-powered device." We recommend
that you only connect one printer to each USB port on the host,
either directly or via a hub. Other devices, like a keyboard and a
mouse, can be connected to the same hub. If you need to connect
more than one Intermec USB printer to a host, you should use
different USB ports.
Using a USB Class A/B cable, connect the Class A plug to your
PC or hub and the Class B plug to your printer.
The USB interface is essentially a one-way communication
interface. There is no communication setup for the USB port.
USB Class A connector. Connect to PC or hub.
USB Class B connector. Connect to USB receptacle on printer's rear plate.
Appendix C — Interfaces
USB
123