Controls And Indicators; Indicator Lamps - Intermec EasyCoder PX4i User Manual

Chapter 2 — Installation

Controls and Indicators

Indicator Lamps

12
The EasyCoder PX4i printer has several ways of communicating
directly with its operator: three colored indicator lamps, a display
window, a membrane-switch keyboard on the front, and a beeper.
Controls and Indicators
The indicators are colored LEDs (Light Emitting Diodes) and are
used for the following purposes:
• Power (solid green) indicates that the power is on.
• Status (solid green) indicates that the printer is ready for use.
• Status (flashing green) indicates that the printer is
communicating.
• Status (solid red) indicates an error condition (see Chapter 9).
• Intermec Ready-to-Work Indicator (blue; on, blink, or off ).
The Intermec Ready-to-Work Indicator, represented by a blue
light on Intermec handheld computers, access points, and
printers, is part of an exclusive monitoring system from
Intermec. The Intermec Ready-to-Work Indicator helps users
quickly determine the readiness of the Intermec device. The
Intermec Ready-to-Work Indicator has three different states:
On, Blinking, and Off. When the Indicator is On, the printer
is ready for use. When the Indicator is blinking, the printer
may be initializing, waiting for external resources, or in need
of user attention. When the Indicator is off, the printer is not
ready to operate.
EasyCoder PX4i User's Guide (IPL Version)