Intermec Ready-To-Work Indicator - Intermec EasyCoder PX4i User Manual

Chapter 9 — Troubleshooting

Intermec Ready-to-Work Indicator

84
The readiness of the printer, individually or as a part of a
solution, is indicated by the blue Intermec Ready-to-Work
Indicator (RTW).
If the RTW blinks or is switched off, the printer is not ready.
Further information can be obtained in the display window by
pressing the <i> key. In case of several errors or similar conditions
occurring simultaneously, only the most significant error is
displayed. Once this error has been cleared, next remaining error
is displayed.
Provided the printer is connected to a network, all conditions
that prevents printing are reported to the Easy ADC Console.
The Easy ADC Console is a PC-based software which allows a
supervisor to monitor all connected devices that have an
Intermec Ready-to-Work Indicator, including handheld
computers, access points, and printers
EasyCoder PX4i User's Guide (IPL Version)