Intermec EasyCoder PX4i User Manual page 84

EasyCoder PX4i User's Guide (IPL Version)
5 Within 10 seconds, press <Enter> to reset the printer to
factory default. The parameters will be reset and the printer
will continue the normal startup.
If you press
has passed, the normal startup process will continue without
any reset being performed.
Note: Resetting to the factory default will reset all files used to
store settings, but it does not affect settings that were already
loaded before the files were removed. This means that, for
example, EasyLAN Wireless settings (SSID, keys, etc.) retain
their values until the next reboot. To reload all settings, simply
reboot after performing a reset.
Chapter 6 — Setting Up the Printer
or wait until the 10 seconds time-out
69