Safety Summary; Product Identification - Intermec EasyCoder PX4i User Manual

Safety Summary

Product Identification

EasyCoder PX4i User's Guide (IPL Version)
Intermec assumes no responsibility regarding the CE Directive if
the printer is handled, modified, or installed in any way other
than that described in Intermec's manuals.
• Read this manual carefully before connecting the printer.
• Moving parts are exposed when the side doors are open, so
ensure that the doors are closed before you operate the printer.
• Do not remove the left-hand cover. Dangerous voltage!
• Do not remove the bottom plate. Dangerous voltage!
• Do not put your fingers inside the print mechanism when the
power is on.
• Place the printer on an even surface which can support its
weight of approximately 13 kg (28.5 pounds) plus supplies.
• Do not spray the printer with water. If you are using a hose to
clean the premises in an industrial environment, remove the
printer or protect it carefully from spray and moisture.
• Carefully read the warning text on the envelope before using a
cleaning card.
The machine label is attached to the printer's rear plate and
contains information on type, model, and serial number as well
as AC voltage. It also contains regulatory agency markings
indicating compliance with specific agency regulations, if any.
Chapter 1 — Introduction
3