External Supply (Fan-Fold) - Intermec EasyCoder PX4i User Manual

External Supply (Fan-Fold)

EasyCoder PX4i User's Guide (IPL Version)
This chapter describes the case when an external media supply is
used such as a stack of fan-folded tickets or an external media
roll.
It is possible to simply let the media enter the printer through
either of the two slots in the rear plate. However, we recommend
the optional Intermec Fan-Fold Kit, which provides adjustable
guides to more accuratly guide the media into the printer. The
Fan-Fold Kit can be fitted to either the upper or the lower slot in
the rear plate.
When using an external media supply, take care to protect the
media from dust, dirt, and other foreign particles that can impair
the printout quality or cause unnecessary wear to the printhead.
Depending on brand and quality, all direct thermal media are
more or less sensitive to heat, direct sunlight, moisture, oil,
plasticizers, fat, and other substances. Protect the media
accordingly.
External supply can be used for:
• Tear-off operation
• Cut-off operation
• Peel-off operation (upper slot only)
• Internal batch takeup operation
Chapter 4 — Media Load
45