Keyboard; Beeper - Intermec EasyCoder PX4i User Manual

Chapter 2 — Installation

Keyboard

Beeper

14
The keyboard is of the membrane-switch type and has seven keys.
The keyboard is supplemented by a large "Feed/Pause" button.
Some keys have hard-coded functions in the startup and setup
modes.
Keyboard Color Code
Yellow: Operation of the printer (operator level)
Green: Setup or service (site or service technician level)
White: Data input to printer (operator or technician level)
Feed/Pause button
The beeper acknowledges that a key has been pressed. Optionally,
an audible alarm can be enabled using an IPL command. It will
start beeping at paper out and ribbon out and will continue
beeping until the start of reload.
Feeds a page or pauses a print job. Repeats last
printed label.
Enter Setup Mode. For more information, see
"Setup Mode" on page
Chapter 7,
Display error message and communication
channel information.
Scroll between types of information after
pressing the Information key. Possible error
messages and information on active
communications channels are shown in a loop.
EasyCoder PX4i User's Guide (IPL Version)
71.