Related Publications; Additional Standards For Boards Ordered With Ruggedized Service - Kontron CP308 User Manual

Introduction
In addition, boards ordered with the ruggedized service comply with the following standards as
well.
Table 1-3:

Additional Standards for Boards Ordered with Ruggedized Service

TYPE ASPECT
Environmental Vibration
(Sinusoidal)
Single Shock
Permanent Shock
1.7

Related Publications

The following publications contain information relating to this product.
Table 1-4:

Related Publications

PRODUCT
CompactPCI Systems and
Boards
Serial ATA
Platform Firmware
All Kontron products
Page 1 - 16
STANDARD
IEC60068-2-6
IEC60068-2-27
IEC60068-2-29
CompactPCI Specification PICMG 2.0, Rev. 3.0
CompactPCI System Management Specification PICMG 2.9 Rev. 1.0
CompactPCI Hot Swap Specification PICMG 2.1 Rev. 2.0
Kontron's CompactPCI System Manual, ID 19954
Serial ATA 1.0a Specification
Unified Extensible Firmware Interface (uEFI) specification, version 2.1
Product Safety and Implementation Guide, ID 1021-9142
REMARKS
Ruggedized version test parameters:
• 10-300 (Hz) frequency range
• 2 (g) acceleration
• 1 (oct/min) sweep rate
• 10 cycles/axis
• 3 axis
Ruggedized version test parameters:
• 30 (g) acceleration
• 9 (ms) shock duration half sine
• 3 number of shocks per direction (total: 18)
• 6 directions
• 5 (s) recovery time
Ruggedized version test parameters:
• 15 (g) acceleration
• 11 (ms) shock duration half sine
• 500 number of shocks per direction
• 6 directions
• 51 (s) recovery time
PUBLICATION
ID 1027-4487, Rev. 3.0
CP308