Introduction
Table 1-1:
4HP CP308 Main Specifications (Continued)
CP308
Intel® GS45 GMCH
Intel® ICH9M-SFF
Page 1 - 10
Intel® GS45 Graphics Memory Controller Hub (GS45 GMCH):
•
Support for a single Core™2 Duo microprocessor
•
64-bit AGTL/AGTL+ based System Bus interface up to 1066 MHz
•
System Memory interface with optimized support for dual-channel
DDR3 SDRAM memory at 800/1066 MHz without ECC
•
DMI interface to ICH9M-SFF
•
Integrated 2D and 3D Graphics Engines or PCIe x16 port
•
HDA interface support
•
C-LINK interface to ICH9M-SFF
•
TCG 1.2-compliant Integrated Trusted Platform Module (iTPM)
82801IUX I/O Controller Hub (ICH9M-SFF):
•
PCI Rev. 2.3 compliant with support for 32-bit/33 MHz PCI opera-
tions
•
Power management logic support
•
Enhanced DMA controller, interrupt controller, and timer functions
•
USB 2.0 host interface with up to eight USB ports available on the
CP308
•
SATA Host Controller with four ports, 3 Gbit/s transfer rate and RAID
0/1 support
•
Six x1 PCI Express ports:
•
Two are used for Gigabit Ethernet
•
Four are used for 8HP I/O expansion (configurable either to
4 x1 PCIe or 1 x4 PCIe)
•
System Management Bus (SMBus) compatible with most I²C™ devices
•
Low Pin Count (LPC) interface
•
SPI Flash interface support
•
HDA interface support
•
DMI interface to GS45 GMCH
•
C-LINK interface to GS45 GMCH
•
RTC controller
SPECIFICATIONS
ID 1027-4487, Rev. 3.0
CP308