Introduction
Table 1-1:
4HP CP308 Main Specifications (Continued)
CP308
Mechanical
Power Consumption
Temperature Range
Battery
Climatic Humidity
Dimensions
Board Weight
Note ...
For a description of the additional 8HP version interfaces, refer to Appendix A,
CP308-HDD Module and Appendix B, CP308-MEDIA Module.
1.5
Kontron Software Support
Kontron is one of the few CompactPCI and VME vendors providing inhouse support for most
of the industry-proven real-time operating systems that are currently available. Due to its close
relationship with the software manufacturers, Kontron is able to produce and support BSPs and
drivers for the latest operating system revisions thereby taking advantage of the changes in
technology.
Page 1 - 14
3U, 4HP, CompactPCI-compliant form factor
See Chapter 5 for details.
Operational:
0°C to +60°C
Storage: -55°C to +85°C
Note ...
When a battery is installed, refer to the operational specifications
of the battery as this determines the storage temperature of the
CP308 (See "Battery" below).
Note ...
When additional components are installed, refer to their opera-
tional specifications as this will influence the operational and stor-
age temperature of the CP308.
3.0V lithium battery for RTC with battery socket.
Recommended type: CR2025
Temperature ranges:
Operational (load): -20°C to +70°C typical (refer to the battery manufac-
Storage (no load): -55°C to +70°C typical (no discharge)
93% RH at 40°C, non-condensing (acc. to IEC 60068-2-78)
100 mm x 160 mm
460 grams (4 HP CP308 with copper heat sink, front panel, two 2 GB SODIMM
memory modules, and battery but without USB NAND Flash module)
330 grams (4 HP CP308 with aluminum heat sink, front panel, two 2 GB
SODIMM memory modules, and battery but without USB NAND Flash module)
SPECIFICATIONS
Standard (depending on processor version
and airflow in the system)
Without hard disk and without battery
turer's specifications for exact range)
ID 1027-4487, Rev. 3.0
CP308