S/P-Dif-Out Interface; Cd-In Interface; Internal Line-Out Mono Interface; Cd-In Connector J9 Pinout - Kontron CP308 User Manual

CP308
B.6.2.3

S/P-DIF-Out Interface

B.6.2.4

CD-In Interface

The CP308-MEDIA provides one CD-In interface implemented on an 4-pin onboard connector,
J9, used to connect a peripheral audio device, such as a CD-ROM.
Figure B-8: CD-In Connector J9
B.6.2.5

Internal Line-Out Mono Interface

The CP308-MEDIA provides one internal line-out mono interface implemented on a 2-pin
onboard connector, J10, used to connect an audio device such as a mono active speaker with
an external load impedance of min. 10 kΩ.
Figure B-9: Internal Line-Out Mono
Connector J10
1
ID 1027-4487, Rev. 3.0
Figure B-7: S/P-DIF-Out Connector J6
The CP308-MEDIA provides one S/P-DIF-Out interface
implemented on an optical fiber connector (Toslink), J6,
on the front panel. This connector is used to transmit
digital audio data, for example, via a decoder.
4
1
2
Table B-5: CD-In Connector J9 Pinout
PIN SIGNAL
1 Left Left channel audio signal
2 GND_AUD Signal ground audio
3 Right Right channel audio signal
4 GND_AUD Signal ground audio
Table B-6: Internal Line-Out Mono Connector
J10 Pinout
PIN SIGNAL
1 Mono-Out
2 GND_AUD
CP308-MEDIA
DESCRIPTION
DESCRIPTION
Mono signal output
Signal ground audio
Page B - 13
I/O
I
--
I
--
I/O
O
--