Kontron CP308 User Manual page 74

Installation
12. Connect all required interfacing cables to the board.
Warning!
The CP308 front panel cables and, when installed, the RIO transition mod-
ule front panel cables may have power applied which comes from an ex-
ternal source.
In addition, these cables may be connected to devices that can be dam-
aged by electrostatic discharging or short-circuiting of pins.
It is the responsibility of the system designer or integrator to ensure that
appropriate measures are taken to preclude damage to the system or inju-
ry to personnel which may arise from the handling of these cables (con-
necting or disconnecting).
Kontron disclaims all liability for damages or injuries resulting from failure
to comply with the above.
Replacement of the CP308 under power is now complete.
Page 3 - 8
CP308
ID 1027-4487, Rev. 3.0