Wall Mounting The Cisco Asr 920 Series Router - Cisco ASR 920 Series Manual

Wall Mounting the Cisco ASR 920 Series Router

Figure 7: Cable Guide Installation For ETSI Rack Brackets
Step 2 Secure the cable guides with the four M6x12mm screws supplied with the cable kit. The recommended maximum torque
is 3N-m.
Figure 8: Installing the Cable Guides (As Per the Standard Kit)
Wall Mounting the Cisco ASR 920 Series Router
To install the Cisco ASR 920 Series Router on a wall, follow the instructions in these procedures:
Attaching the Brackets to the Router for Wall-Mounting
Note
While wall mounting the Cisco ASR 920 Series Router, always ensure that the power supplies are at the top
position.
Installing the Cisco ASR 920 Series Router
8
Installing the Cisco ASR 920 Series Router