Configuring Mac Address Filtering - Cisco Small Business RV315W Administration Manual

Security

Configuring MAC Address Filtering

STEP 5
Configuring MAC Address Filtering
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV315W Broadband Wireless VPN Router Administration Guide
- Single IP Address: Controls traffic from a specific source IP address.
- IP Address Range: Controls traffic from a specific range of source IP
addresses.
• Destination IP Address: Choose one of the following options as the traffic
destination:
- Any: Controls traffic to any destination IP address.
- Single IP Address: Controls traffic to a specific destination IP address.
- IP Address Range: Controls traffic to a specific range of destination IP
addresses.
• Action: Click Enable to enable this policy, or click Disable to disable this
policy.
Click Save to save your settings.
MAC address filtering permits and blocks network access from specific devices
through the use of MAC address list.
To configure MAC address filtering:
Click Security > MAC Address Filtering. The MAC Address Filtering page opens.
In the Filter Policy area, choose one of the following filtering policies:
• Deny Network Access: The MAC addresses in the list are denied and all
other MAC addresses not included in the list are permitted.
• Permit Network Access: Only the MAC addresses in the list are permitted
and all other MAC addresses not included in the list are denied.
In the MAC Address Filtering Policies area, specify the list of MAC addresses.
Click Add to add a MAC address. The MAC Address Filtering Policy page opens.
Up to 20 MAC addresses can be configured on the RV315W.
NOTE
Enter the following information:
• MAC Address: Enter the MAC address that you want to filter.
8
84