74 Customizing your telephone
Changing the language on the display
You can select the language that appears on the display of each Enterprise Edge
telephone. Enterprise Edge software supports four language options: Primary,
Alternate, Alternate 2, and Alternate 3. Button caps are available for different
languages. When your system is first installed, all telephones use the Primary
default language.
¥ÞâÚ
Ä
¥ÞâÛ
Ä
¥ÞâÜ
Ä
¥ÞâÝ
Ä
If you program
button until the language you want appears on the display. You cannot program
Ä¥ÞâÛ
button.
Programming a feature code on a memory button
You can program a feature code on a memory button. If you press the button a
second time can cancel the feature.
Programming feature buttons
Ä¥Ü
Any memory button not programmed as an external or internal line, target line,
Answer button, or Handsfree/Mute button, is available for features.
Ä¥Ü
1. Press
2. Press the memory button you want to program with a feature.
3. Enter the appropriate feature code you want to assign on the button.
You cannot program the following feature codes on a memory button: Long Tones
and any code beginning with
Ä¥à
and
Enterprise Edge 2.0 Feature Programming Telephone Guide
Language - Primary
Language - Alternate
Language - Alternate 2
Language - Alternate 3
Ä¥ÞâÚ
on to a memory button, you can press that
Ä¥ÞâÜ
or
.
¥
except
(Contrast Adjustment).
Tip
When you program a button with the line pool feature code, you must enter a
line pool access code after the feature code. The programmed line pool button
accesses a specific line pool, not the line pool feature.
Ä¥ÞâÝ
or
Ä¥ÞâÚ
(Language Option)
on a memory
P0911589 Issue 03