Changing The Language On The Display; English; French; Spanish - Nortel M7410 Installation And Maintenance Manual

74 Customizing your telephone

Changing the language on the display

You can select the language used on the display of each Enterprise Edge telephone.
Enterprise Edge software supports three languages: English, French and Spanish.
Button caps are available for each language. When your system is first installed, all
telephones use English.
If you program
button until the language you want appears on the display. You cannot program
ƒ•fi‚¤

English

Press
ƒ•fi‚⁄

French

Press
ƒ•fi‚¤

Spanish

Press
ƒ•fi‚‹

Programming a feature code onto a memory button

You can program a feature code onto a memory button. In some cases, pressing the
button a second time cancels the feature.

Programming feature buttons

ƒ•‹
Any memory button not programmed as an external or internal line, target line,
Answer button, or Handsfree/Mute button, is available for features.
1. Press
ƒ•‹
2. Press the memory button you want to program with a feature.
3. Enter the appropriate feature code you want to assign onto the button.
The following feature codes cannot be programmed onto a memory button: Long
Tones and any code beginning with
Choice) and
ƒ•‡
Enterprise Edge Feature Programming Telephone Guide
on to a memory button, you can press that
ƒ•fi‚⁄
or
ƒ•fi‚‹
.
.
.
.
•
(Contrast Adjustment).
Tip
When you program a button with the line pool feature code, you must enter a
line pool access code after the feature code. The programmed line pool button
accesses a specific line pool, not the line pool feature.
onto a memory button.
except
ƒ•fi‚⁄
(Language
P0908510 Issue 02