Release K.11.13; Release K.11.14; Release K.11.15 - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

MSTP Enhancement (PR_1000310463) — Implementation of legacy path cost MIB and
CLI option for MSTP.
RSTP (PR_1000307278) — Replacing an 802.1D bridge device with an end node (non-STP
device) on the same Switch port, can result in the RSTP Switch sending TCNs.
Web UI (PR_1000303371) — In the Web User Interface, the QOS Device Priority window
scroll bar does not allow sufficient scrolling to view all entries.
Web UI (PR_1000311917) — When the last port on the last card is configured in a trunk
or mesh, and a user browses to a specific location in the Web user interface, the HTTP Web
server degrades the switch, causing the Web user interface to hang.

Release K.11.13

The following problems were resolved in release K.11.13 (never released)
Routing (PR_1000306239) — In some cases, the command 'show ip route' may display
incorrect information.
Self-test (PR_1000315509) — The self-test LED does not turn off after bootup of an empty
chassis.
sFlow (PR_1000317785) — Using Inmon Traffic Server, traffic will be reported on ports
with no traffic present. Other ports may or may not have faulty counter reports.

Release K.11.14

The following problems were resolved in release K.11.14 (never released)
SNMP (PR_1000315054) — SNMP security violations are entering the switch syslog when
a valid SNMPv3 'get' operation is initiated.
Web (PR_1000302713) — When using the Web interface and a large amount of stacking
interactions occur, portions of the information from the stack commander may no longer
appear.

Release K.11.15

The following problems were resolved in release K.11.15 (never released)
CLI (PR_1000298299) — After a reboot, the Switch does not provide warning that the
running configuration and startup configuration differ, and does not offer an option to save
the running configuration.
Software Fixes in Release K.11.12 - K.13.49
Release K.11.13
146

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents