Copy Command With Show Tech Option - HP ProCurve 3500yl Release Notes

Enhancements
Release K.13.04 Enhancements
ProCurve(config)# show vrrp
VRRP Global Statistics Information
VRRP Enabled
Protocol Version
Invalid VRID Pkts Rx
Checksum Error Pkts Rx : 0
Bad Version Pkts Rx
VRRP Virtual Router Statistics Information
Vlan ID
Virtual Router ID
State
Up Time
Virtual MAC Address
Master's IP Address
Associated IP Addr Count : 1
Advertise Pkts Rx
Zero Priority Rx
Bad Length Pkts
Mismatched Interval Pkts : 0
Mismatched IP TTL Pkts
Figure 19. Example of the show vrrp Command with Statistics
Enhancement (PR_ 0000000420) — This enhancement provides the show-tech option for
■
customizing copy tftp output.

Copy Command with Show Tech Option

This enhancement allows the show-tech command to execute a series of commands found in a special
file stored in flash. If no file is found, the current hard-coded list is used. This feature provides the
ability to customize the output.
To upload the customized list, the copy tftp command will include the show-tech option in the
destination parameter.
Syntax: copy <source> <destination> [options]
Copy data files to or from the switch.
93
: Yes
: 2
: 0
: 0
: 22
: 1
: Initialize
: 64 mins
: 00005e-000101
:
Near Failovers
: 0 Become Master
: 0 Zero Priority Tx
: 0 Bad Type Pkts
Mismatched Addr List Pkts : 0
: 0 Mismatched Auth Type Pkts : 0
: 0
: 0
: 0
: 0