Operating Notes; Release K.13.41 Enhancements; Release K.13.42 Enhancements; Release K.13.43 Enhancements - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Enhancements

Release K.13.41 Enhancements

ProCurve(config)# logging priority-descr severe-pri
Figure 35. Example of the Logging Command with a Priority Description
Note
A notification is sent to the SNMP agent if there are any changes to the syslog parameters either
through the CLI or with SNMP.

Operating Notes

Duplicate IP addresses are not stored in the list of syslog servers.
If the default severity value is in effect, all messages that have severities greater than
the default value are passed to syslog. For example, if the default severity is "debug", all
messages that have severities greater than debug are passed to syslog.
There is a limit of six syslog servers. All syslog servers are sent the same messages using
the same filter parameters.
An error is generated for an attempt to add more than six syslog servers.
Release K.13.41 Enhancements
No enhancements; Bug fixes only. (Not a public release)

Release K.13.42 Enhancements

No enhancements; Bug fixes only. (Never released)

Release K.13.43 Enhancements

Release K.13.43 includes the following enhancements (Not a public release):
Enhancement (PR_0000003557) — The ability to enable/disable the USB port via CLI and
SNMP was added. Note that after being disabled and subsequently re-enabled, the USB port
may not function consistently with the PCM USB Autorun features until the switch has been
reloaded.
143

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents