Rfc Compliance; Hrswrunperf Group Maintenance; Table 11-11. Compliance With Hrswrunperf Group Definitions In Rfc 1514 - HP T9576G06 Management Manual

Host Resources Subagent

RFC Compliance

Table 11-11 summarizes compliance of hrSWRunPerf group support with RFC 1514.

Table 11-11. Compliance With hrSWRunPerf Group Definitions in RFC 1514

Object Descriptor
hrSWRunPerfCPU
hrSWRunPerfMem

hrSWRunPerf Group Maintenance

Whenever a value in the hrSWRun group changes, the subagent reflects the change in
the hrSWRunPerf group to retain a one-to-one correspondence of entries in tables in
both groups. All old values are deleted and replaced with all new values.
You control whether the subagent creates or maintains hrSWRun group objects by
using the -w startup parameter or, after startup, by setting the value of
zhrmEnableSoftwareGroup in the zhrmSaProcess group:
Use the -w startup parameter to suppress creation of hrSWRun group objects.
Omit the -w startup parameter to enable object creation.
Set zhrmEnableSoftwareGroup to 0 to disable maintenance of hrSWRunGroup
objects. Set it to 1 to enable object maintenance.
Compliance
Yes
Partial
SNMP Configuration and Management Manual—424777-006
Explanation
See Table 11-10.
For non-operating system entries, the number of
kilobytes associated with the memory pages that
have been swapped in by the process and that are
still resident is returned. For operating system
entries, the amount of RAM installed in the
corresponding CPU is returned.
11 -61
RFC Compliance