Release K.13.19; Release K.13.20 - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Wake-On-LAN (PR_0000004794) — Wake-On-LAN does not always work successfully.
IP Phone (PR_0000004803) — A tandem IP phone may stop talking to the switch after a
connected PC login failure and reboot.
PIM-SM (PR_0000005219) — When the switch sends a "Register-Stop" message, it will
use an incorrect source IP address in the packet header of the message. Rather than using
the IP address configured for the PIM RP, the switch uses the VLAN IP address.
Mirroring (PR_0000002926) — When mirroring on a mesh or trunk port, the mirror
session is not cleared after the mesh or trunk configuration is deleted.

Release K.13.19

The following problems were resolved in release K.13.19 (not a public release).
Enhancement (PR_0000003808) — This enhancement allows the user to create command
aliases for use in place of command names and their options. For more information, see
"Release K.13.19 Enhancements" on page
Enhancement (PR_0000000818) — This enhancement allows the user to enter addresses
and filter parameters for syslog using SNMP, which allows more options for remote access
and management of the switch. For more information, see
on page
109.
Enhancement (PR_0000003390) — This enhancement allows the user to customize Web
Authentication HTML pages. For more information, see
page
109.
Enhancement (PR_1000460265) — This enhancement provides the user with Dynamic
IP Lockdown, which is used to prevent IP source address spoofing on a per-port and
per-VLAN basis. For more information, see

Release K.13.20

The following problems were resolved in release K.13.20 (not a public release).
Enhancement (PR_0000004124) — Support was added for the J9144A ProCurve 10-GbE
X2-SC LRM Optic. For more information, see
10-GbE (PR_0000001701) — Sometimes, the LRM optic is misidentified as an LR optic.
CLI (PR_0000001528) — 10-GbE X2 transceivers do not report their part numbers in
response to the CLI command show tech transceivers.
Software Fixes in Release K.11.12 - K.13.49
109.
"Release K.13.19 Enhancements"
"Release K.13.19 Enhancements" on
"Release K.13.19 Enhancements" on page
"Release K.13.20 Enhancements" on page
Release K.13.19
109.
138.
196

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents