Release K.13.26 Through K.13.39; Release K.13.40 - HP ProCurve 3500yl Release Notes
Software version k.13.49
Hide thumbs
Also See for ProCurve 3500yl:
- Access security manual (778 pages) ,
- Specifications (16 pages) ,
- Features (6 pages)
Table of Contents
Advertisement
GVRP/RADIUS (PR_0000006051) — RADIUS-assigned VLANs are not propagated
■
correctly in GVRP. Please see
"
for a description of the behavior change with this fix.
Note: This fix is associated with some new switch behavior:
When only one port has learned of a dynamic VLAN, it will advertise that VLAN if an auth
port has been RADIUS-assigned that dynamic VLAN, regardless of the unknown-VLANs
configuration of that port. The fix accommodates RADIUS-assigned (and hpicfUsrProf
MIB-assigned) tagged VLANs as well as untagged VLANs. These changes are enabled by
default and are not configurable. This fix does not modify any other GVRP behavior.
Assert (PR_0000001836) — VRRP configuration conversion from K.12.xx to K.13.xx
■
software may experience a crash (assert) in ConfigRecIndex().
Assert (PR_0000005208) — Entering no ipv6 enable at the CLI may result in a crash with
■
a message similar to the following.
Software exception at ConfigRecIndex.cc:421 -- in 'mSess1', task ID
= 0x58c1c38-> ASSERT:
■
Config (PR_0000002620) — A MAC-lockdown command that includes VLAN information
may fail when it is copied to the default configuration.
Release K.13.26 through K.13.39
Software never built.
Release K.13.40
The following problems were resolved in release K.13.40 (Never released).
■
Enhancement (PR_0000003127) — Link Trap and LACP Global Enable/Disable. For more
information, see
"Release K.13.40 Enhancements" on page
■
Enhancement (PR_0000003128) — The ability to clear statistics was added. For more
information, see
"Release K.13.40 Enhancements" on page
Enhancement (PR_0000003718) — The MAC Lockout limit was increased. For more
■
information, see
"Release K.13.40 Enhancements" on page
Enhancement (PR_0000007388) — Crash Log Debug. For more information, see
■
K.13.40 Enhancements" on page
■
Crash (PR_0000003597) — Configuring a kbps based rate-limit on 10Gig port may trigger
a crash in the area of bttfHwRateLimits.c:2191.
"Note: This fix is associated with some new switch behavior:
failed.
139.
Software Fixes in Release K.11.12 - K.13.49
Release K.13.26 through K.13.39
139.
139.
139.
"Release
200
Advertisement
Table of Contents
