Management Access Security Enhancement - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Enhancements
Release K.13.16 Enhancements
Syntax: console inactivity-timer <minutes>
If the console port has no activity for the number of minutes configured, the switch
terminates the session. A value of zero indicates the inactivity timer is disabled.
Default: 0 (zero)
For example:
ProCurve(config)# console inactivity-timer 20
Enhancement (PR_1000780247) — This enhancement provides hpicf Download MIB
support for transferring configuration files both to and from a TFTP server. Prior to this
enhancement, MIB support was limited to downloading and uploading software files.
Enhancement (PR_0000001430) — This enhancement allows the user to configure access
methods for IP Authorized Manager entries.

Management Access Security Enhancement

This feature allows the configuration of access methods for IP Authorized Manager entries. Each of
the management access methods will have its own set of authorized managers. The access methods
include:
SSH
Telnet
Web
TFTP
SNMP
You can configure the access method via the CLI, the menu, or through the Web interface. The menu
interface only supports IPv4. The following restrictions apply to all three methods of configuration.
When no IP authorized manager rules are configured, the access method feature is
disabled, that is, access is not denied.
If the Management VLAN is configured, access can only be on that VLAN.
Using the access method feature is optional. If no access method is configured, the
access method defaults to "all".
If access is not specified, it defaults to "manager".
The IP mask defaults to 255.255.255.255.
Up to 100 IP authorized manager entries are allowed.
95

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents