Release K.12.11; Release K.12.12; Release K.12.13; Release K.12.14 - HP ProCurve 3500yl Release Notes

SNMP (PR_1000374893) — When retrieving the switch serial number via SNMP, the
■
management module serial number is returned instead of the chassis serial number.
■ SNMP (PR_1000422129) — HP Fault Finder doesn't send the interface index with the
SNMP trap, even though it is listed in the system log.

Release K.12.11

Software never released.

Release K.12.12

The following problems were resolved in release K.12.12 (Not a general release).
Crash (PR_1000420709) — Entering a backslash at the CLI may cause the switch to crash
■
with a message similar to:
PPC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x08e66508 HW Addr=0x00b4f2ac IP=0x0018a864
Task='mSess1' Task ID=0x8e67170
■ Link LED (PR_1000425143) — The Small Form-factor Pluggable (SFP) link LED does not
work when SFP is hot-swapped into the switch.

Release K.12.13

Software never released.

Release K.12.14

The following problems were resolved in release K.12.14.
■ Authentication (PR_1000422933) — Issue with local password authentication.
CLI/Clear button (PR_1000424194) — The command no password manager deletes the
■
password, but fails to delete the username. Similarly, pressing the clear button deletes the
password but not the username.
SNMP (PR_1000423362) — Setting username via SNMP (hpSwitchAuthMIB) deletes the
■
password.
Software Fixes in Release K.11.12 - K.13.49
fp: 0x3be00000 sp:
Release K.12.11
166