Release K.13.17 Enhancements; Release K.13.18 Enhancements; Release K.13.19 Enhancements; Using A Command Alias - HP ProCurve 3500yl Release Notes

Enhancements

Release K.13.17 Enhancements

• debug
• debug2
• debug3
Release K.13.17 Enhancements
No enhancements; Bug fixes only.

Release K.13.18 Enhancements

Release K.13.18 includes the following enhancements:
Enhancement (PR_1000406763) — New commands were added to the CLI response to
■
the show tech command.

Release K.13.19 Enhancements

Release K.13.19 includes the following enhancements:
Enhancement (PR_0000003808) — This enhancement allows the user to create command
■
aliases for use in place of command names and their options.

Using a Command Alias

You can create a simple command alias to use in place of a command name and its options. Choose
an alias name that is not an existing CLI command already. Existing CLI commands are searched
before looking for an alias command; an alias that is identical to an existing command will not be
executed.
The alias command is executed from the current configuration context (operator, manager, or global).
If the command that is aliased has to be executed in the global configuration context, you must
execute the alias for that command in the global configuration context as well. This prevents
bypassing the security in place for a particular context.
ProCurve recommends that you configure no more than 128 aliases.
Syntax: [no] alias <name> <command>
109