Release K.11.36; Release K.11.37; Release K.11.38; Release K.11.39 - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

MIB (PR_1000307831) — The MIB value for ipAddrTable is not populated.
RIP (PR_1000331536) — RIP does not send a route poison update in response to a failed
route.
Show tech (PR_1000294072) — Show Tech statistics displays incorrect port names for
fixed ports.

Release K.11.36

The following problems were resolved in release K.11.36 (never released)
10-GbE (PR_1000346107) — The guaranteed minimum bandwidth feature is not working
on 10-GbE ports.

Release K.11.37

The following problems were resolved in release K.11.37 (not a general release)
Login (PR_1000347300) — Login failures do not result in an "Invalid Password" response.

Release K.11.38

The following problems were resolved in release K.11.38 (never released)
10-GbE (PR_1000346107) — The Guaranteed minimum bandwidth feature does not work
on 10-GbE ports.
CLI (PR_1000305349) — The command, no ip router-id
is set, there is no way to remove it.
QoS (PR_1000346708) — IP-Precedence does not set the correct priority if all TOS bits
are set to 1.

Release K.11.39

The following problems were resolved in release K.11.39 (never released)
Crash (PR_1000344998) — The switch may crash with a message similar to
Software exception at sme.c:103 -- in 'mSess1', task ID = 0x8e05520
-> ASSERT:
failed
Crash (PR_1000351693) — The switch may crash with a message similar to
Software Fixes in Release K.11.12 - K.13.49
does not work. Once a router-ID
,
Release K.11.36
152

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents