HP ProCurve J8694A Supplementary Manual

Read Me First

f
or the ProCurve Switch yl Module (J8694A)
Software Release K.11.01 or Later Is Required on Your Switch 3500yl and
6200yl
1
For installation information refer to the ProCurve Switch yl Module Installation Guide.
1
The latest edition is always available in PDF format and downloadable as described in "View or Download the Software Manual Set" on page 1.
X2 Transceiver Operating Temperature Variance
The X2 transceivers are rated at a lower operating temperature {( than the
0° C to 40° C (32° F to 104° F)}
6200yl and 3500yl switches or the yl module { . Therefore when an X2
0° C to 55° C (32° F to 131° F)}
transceiver is installed in a yl module in a 6200yl or 3500yl Switch, it lowers the temperature rating
of the module and the switch to equal the rating of the transceiver.
Note
Hot swapping the yl module is not supported. See the ProCurve Switch yl Module Installation Guide
for more information.
Go to: www.procurve.com/manuals
View or Download the Software Manual Set
The printed Installation and Getting Started Guide shipped with your ProCurve product describes installing,
minimally configuring, and troubleshooting. For further software feature and configuration information, visit
the ProCurve Web site, where you can freely view or download the latest software manuals for your product.
To do so, go to: www.procurve.com/manuals
You may want to bookmark this Web page for easy access in the future.
You can also register on the My ProCurve portal to receive a set of ProCurve switch manuals on CD-ROM. To
register and request a CD go to www.procurve.com and click on My ProCurve Sign In. After registering and entering
the portal, click on My Manuals.