Increase Mac Lockout To 64; Configure Logging Via Snmp - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Enhancements
Release K.13.40 Enhancements
SNMP displays the counter and statistics totals accumulated since the last reboot; it is not affected
by the clear statistics global command or the clear statistics <port-list> command. An SNMP trap is
sent whenever the statistics are cleared.
Note
The clearing of statistics cannot be uncleared.
Enhancement (PR_0000003718) — The MAC Lockout limit was increased.

Increase MAC Lockout to 64

The MAC lockout feature allows all traffic to or from a given MAC address to be dropped by the
switch. A MAC address can exist on many different VLANs, so a lockout MAC address must be added
to the MAC table as a drop. As this can quickly fill the MAC table, restrictions are placed on the
number of lockout MAC addresses based on the number of VLANs configured. The restriction for
the range of 17-256 VLANs is being increased to allow up to 64 lockout MAC addresses.
VLANs Configured
1-8
9-16
17-256
257-1024
1025-2048
Enhancement (PR_0000007388) — Crash Log Debug was enhanced.

Configure Logging via SNMP

Debug messages generated by the software can be sent to a syslog server. This feature provides the
ability to enter addresses and filter parameters for syslog using SNMP, which allows more options
for remote access and management of the switch. The HP enterprise MIB hpicfSyslog.mib is added
to allow the configuration and monitoring of syslog. (RFC 3164 supported)
The CLI has some additional parameters to permit interoperability with SNMP that are explained
below.
141
Number of MAC Lockout
Addresses
200
100
64
16
8
Total Number of MAC
Addresses
1,600
1,600
16,384
16,384
16,384

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents