Release K.13.03 Enhancements; New Cli Commands - HP ProCurve 3500yl Release Notes

Enhancements

Release K.13.03 Enhancements

Error Messages
Error
Attempting to assign the preempt delay time to the
Virtual Router before declaring it as an Owner or
Backup
Attempting to assign an out of range preempt delay time
to the Virtual Router instance.
Attempting to change the preempt delay time value
when the Virtual Router is active.
Release K.13.03 Enhancements
Release K.13.03 includes the following enhancements.
Enhancement (PR_1000400991) — The 802.1X Controlled Directions feature now
■
functions independently of the STP configuration, allowing you to run STP and 802.1X
separately. For more information, see

New CLI Commands

These three commands show the administrative state of the controlled-directions:
show port-access authenticator config
show port-access mac-based config
show port-access web-based config
These three commands show the operational state of the controlled-directions:
show port-access authenticator
show port-access mac-based
show port-access web-based
75
Error Message
The Virtual Router must be defined as an Owner or Backup
router first.
Invalid input: <out of range value>
VR operation must be "down" prior to modifying VR's parame-
ters
"New CLI Commands" below.