Release K.13.09; Release K.13.10 - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Software Fixes in Release K.11.12 - K.13.49

Release K.13.09

Release K.13.09
The following problems were resolved in release K.13.09.
Crash (PR_0000001689a) — A switch running software version K.13.04 or higher may
crash during configuration of broadcast rate limiting. Event log messages may be similar to
the following.
W 03/11/06 03:18:53 00374 chassis: Ports 25-48 Slave ROM Tombstone:
0x13000601
W 03/11/06 03:18:53 00374 chassis: Ports 25-48 Slave ROM Tombstone:
0x13000601W
03/11/06 03:18:53 00374 chassis: Ports 25-48: Lost Communications
detected - Heart Beat Lost I 03/11/06 03:19:00 00375 chassis: Ports
25-48 Dowloading
I 03/11/06 03:19:01 00376 chassis: Ports 25-48 Download Complete
I 03/11/06 03:19:15 00422 chassis: Ports 25-48 Ready
Web Authentication (PR_0000002047) — Use of Web authentication with MS-CHAP-v2
to Microsoft IAS may cause the switch to crash with a message similar to the following.
Software exception at exception.c:501 -- in 'mWebAuth', task ID =
0x8438440 Memory System error at 0x7f56610 - memPartFree
MAC Authentication (PR_0000002075) — A client that fails MAC authentication will be
blocked by AAA rather than the port being moved, unblocked, into a configured
Unauthenticated VLAN.

Release K.13.10

The following problems were resolved in release K.13.10 (never released).
VLAN/Config (PR_1000782308) — Updating from K.12.xx to K.13.03 may result in an
incorrect port VLAN assignment.
MAC Authentication (0000002318) — Authenticated MAC Auth clients may
intermittently get placed into the unauthenticated VLAN and never come on-line.
Port Security (PR_1000777162) — When Port Security is configured for static MAC
address learning, prolonged flooding of unicast traffic may occur under certain conditions.
Static Routes/Config (0000001461) — Static routes mapped to VLANs are incorrectly
migrated during the update from K.12.xx to K.13.xx.
Wrong Error Message/VRRP (0000000909) — You may receive an "inconsistent value"
error message when attempting to add (max+1) entity for VRRP to track. The correct error
message should be "too many entries to track."
189

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents