Release K.12.16 Enhancements; Release K.12.17 Enhancements; Release K.12.18 Enhancements - HP ProCurve 3500yl Release Notes

You can see if informs are enabled or disabled with the show snmp-server command as shown in Figure
9.
ProCurve(config)# show snmp-server
SNMP Communities
Community Name
---------------- -------- ------------
public
Trap Receivers
Link-Change Traps Enabled on Ports [All] : All
Send Authentication Traps [No] : No
Informs [Yes] : Yes
Address
----------------------
-------------------
Excluded MIBs
Snmp Response Pdu Source-IP Information
Selection Policy
Trap Pdu Source-IP Information
Selection Policy
Figure 9. Example Showing SNMP Informs Option Enabled

Release K.12.16 Enhancements

No enhancements, software fixes only.

Release K.12.17 Enhancements

No enhancements, software fixes only.

Release K.12.18 Enhancements

Release K.12.18 includes the following enhancement:
MIB View Write Access
Manager Unrestricted
| Community
: Default rfc1517
: Default rfc1517
Release K.12.16 Enhancements
Events Sent in Trap
----------------
Enhancements
62