Release K.13.01 Enhancements - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Enhancements

Release K.13.01 Enhancements

Release K.13.01 Enhancements
Release K.13.01 is a major software update containing many new features and enhancements to
existing features, including IPv6 host and application layer features (see
for 2900/3500/5400/6200/8200" on page 71
The following enhancements have been documented in the latest revisions to the manuals (January
2008). Refer to the indicated manuals for additional details.
Software Manual/
Enhancements
Management and Configuration Guide
PoE Power Allocation Methods: Allows you to manually allocate the amount of PoE power for a port by either
USB Secure Autorun: Helps ease the configuration of ProCurve switches by providing a way to
SNMP Traps: Allow you to configure the switch to send network security and link-change
MAC-based Remote Mirroring: Allows you to use MAC as a criteria in selecting traffic that needs to be
Show Command Changes: The show power-management CLI command has been changed to show
Scalability: Increased max trunks (60); and increased helper address (4k). For scal-
Advanced Traffic Management Guide
STP Root Guard: STP root guard allows user to prevent changes to the root bridge and thus
69
for details).
its class or a defined value.
auto-execute CLI commands from a USB flash drive. Note that the ability
to create a valid AutoRun file also requires ProCurve Manager. For details,
see the section on "USB Autorun" in the Appendix on "File Transfers".
notifications to configured trap receivers. More error conditions can be
reported and logged to help resolve security threats and network issues.
monitored in addition to current port, ACL, and direction criteria.
power-over-ethernet. You can use this command and the show power slot
<slot-id> to display information about PoE power.
The show system-information CLI command syntax has been changed to
show system with additional options to display details of system compo-
nents: fans, information, power-supply, and temperature.
ability values for VLANs, hardware, ARP, and routing, see the new Appendix
titled "Scalability: IP Address, VLAN, and Routing Maximum Values".
preventing malicious attackers from modifying the root switch and
ensuring that the STP topology maintain the optimal setting.
QinQ: QinQ (provider bridging) has been added to allow frames from multiple
customers to be forwarded through another topology (provider network)
using service VLANs or S-VLANs. For more information, see the new "QinQ
Provider Bridging" chapter.
"IPv6 Configuration Guide
Description

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents