Release K.12.46; Release K.12.47 - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Software Fixes in Release K.11.12 - K.13.49

Release K.12.46

SNMP (PR_1000444744) — An snmp set of hpicfDot1xPaePortauth or an snmp set
hpicfDot1xPaePortSupp of an invalid value may cause the switch to crash with a message
similar to the following:
ASSERT at aaa8021x_dyn_reconfig.c
SSH (PR_1000461002) — Issue with authentication when SSH is configured.
Release K.12.46
The following problems were resolved in build K.12.46. (Never Released.)
Mirroring (PR_1000458287) — Remote mirroring does not work in slots K or L of the
5412zl or 8212zl chassis.
Crash (PR_1000456340) — Switch may crash with a message similar to:
No message buffers: alloc_free.c:435.
The trigger for this crash is unknown, though it is suspected to be related to sFlow.
Module Failure (PR_1000464335) — Switches running K.12.31 - K.12.43 may experience
a problem with modules failing to boot. The system log may report a message similar to the
following:
W 11/08/05 02:43:14 00374 chassis: Slot D Failed to
boot-timeout-(AGENT_FAILED)
I 11/08/05 02:43:19 00375 chassis: Slot D Downloading
I 11/08/05 02:43:21 00376 chassis: Slot D Download Complete
W 11/08/05 02:44:21 00274 chassis: Slot D self test failure or
unsupported module
Telnet hang (PR_1000457765) — If Ctrl+S is typed and then the Telnet window is closed,
the Telnet session may become unresponsive, and fail to reset by the kill command issued
at the console prompt. This may require the switch to be reloaded to become active again.

Release K.12.47

The following problems were resolved in release K.12.47.
Enhancement Removed (PR_1000468258) — The PC attached to IP telephone
enhancement was removed. For more information, see
page
66.
175
.
"Release K.12.47 Enhancements" on

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents