HP ProCurve 3500yl Release Notes page 114

Enhancements
Release K.13.16 Enhancements
ProCurve# show monitor 1
Network Monitoring
Session: 1 Session Name:
ACL: no ACL relationship exists
Mirror Destination: 48
Untagged traffic
Monitoring Sources
------------------
Port: 3
Figure 23. Example of Session Output Showing no-tag-added Option
Note
For more information about traffic mirroring, see "Monitoring and Analyzing Switch Operation" in
the Management and Configuration Guide for your switch. For more information about ACL
filtering, see "Access Control Lists (ACLs)" in the Access Security Guide for your switch.
Using SNMP to Configure No-Tag-Added
The MIB object hpicfBridgeDontTagWithVlan is used to implement the no-tag-added option, as shown
below:
hpicfBridgeDontTagWithVlan OBJECT-TYPE
SYNTAX INTEGER
{
enabled(1),
disabled(2)
}
MAX-ACCESS
STATUS
DESCRIPTION
"This oid mentions whether VLAN tag is part of the
mirror'ed copy of the packet. The value 'enabled'
denotes that the VLAN tag shouldn't be part of the
mirror'ed copy; 'disabled' does put the VLAN tag in the
mirror'ed copy. Only one logical port is allowed.
This object is persistent and when written the entity
103
: untagged
Direction
---------
Both
read-write
current
Indicates the no-tag-added option is configured.