Release K.12.03 - HP ProCurve 3500yl Release Notes

Software version k.13.49
Hide thumbs Also See for ProCurve 3500yl:
Table of Contents

Advertisement

Crash (PR_1000392863) — Switch may crash when setmib tcpConnState is used, with a
message similar to:
NMI event SW:IP=0x0079f4a0 MSR:0x00029210 LR:0x006dca60
Task='eTelnetd' Task ID=0x8a7cbb0 cr: 0x20000042 sp:0x08a7c870
Daylight savings (PR_1000364740) — Due to the passage of the Energy Policy Act of
2005, Pub. L. no. 109-58, 119 Stat 594 (2005), starting in March 2007 daylight time in the United
States will begin on the second Sunday in March and end on the first Sunday in November.
DHCP (PR_1000397753) — A unicast DHCP request that has already been relayed by
another router is sometimes dropped.
Hang (PR_1000397964) — The switch appears to hang where all routing stops, the switch
cannot ping anything, even addresses configured locally.
Proxy-ARP (PR_1000393571) — Proxy-ARP sends responses to gratuitous ARPs.
Remote Mirroring/Trunking (PR_1000397196) — Remote mirroring configured on a
trunk does not restart after the switch is rebooted. Workaround: after a switch reboot,
reconfigure the trunk remote as a mirroring source.
RIP (PR_1000393366) — The switch does not process RIP (v2) responses containing
subnets with a classful subnet mask, when the receiving RIP switch has a connected VLSM
network defined that would fall within that classful range.

Release K.12.03

The following problems were resolved in release K.12.03 (not a general release)
CLI (PR_1000373443) — The CLI update command help text and confirmation message is
misleading and confusing.
Crash (PR_1000399448) — Changes to traffic monitoring settings may trigger the switch
to crash with a message similar to:
Software exception at ease_ctrl.c:575 -- in 'mEaseCtrl',
task ID = 0x8347161
Crash (PR_1000401664) — Use of the CLI command dir with a very large path name may
cause the switch to crash with a message similar to:
PC Data Storage (Bus Error) exception vector 0x300:
Stack Frame=0x08e54928 HW Addr=0x00b3eefc IP=0x0018a740
Task='mSess2' Task ID=00 fp: 0x00000000 sp:
Enhancement (PR_1000379804) — Historical information about MAC addresses that
have been moved has been added to the show tech command output.
Software Fixes in Release K.11.12 - K.13.49
Release K.12.03
162

Advertisement

Table of Contents
loading

This manual is also suitable for:

Procurve 8212zlProcurve 5400zl6200yl

Table of Contents