Table of Contents
Advertisement
Restore the factory default settings
Introduction
Sometimes you want to go back to the initial settings. You can restore the factory default settings
in Océ Express WebTools.
NOTE
Log in as a Key Operator to only restore the Key Operator settings. Log in as a System
Administrator to only restore the System Administrator settings. To restore all the factory
default settings you must log in as a Power User.
Procedure
1. Open the [Preferences] tab.
2. Click on [Restore defaults] in the upper right-hand corner of the screen. A window opens.
3. Click [Ok] to restore the factory default settings, or [Cancel] to close the window without restoring
the factory defaults.
Restore the factory default settings
Chapter 5 - Configure the print system
111
Advertisement
Table of Contents
