Omron S8AS User Manual page 97

Test Mode
Operations and Displays in the Mode Selection Menu
r u n
1 2 3 4 5 6
V A
s e t
1 2 3 4 5 6 V A
t s t
1 2 3 4 5 6
V A
Flashing
o
1 2 3 4 5 6
V A
1 2 3 4
If the S8AS is switched to the Mode Selection Menu from Run
Mode, RUN will be displayed on the seven-segment display. If the
S8AS is switched to the Mode Selection Menu from Setting Mode,
SET will be displayed on the seven-segment display.
°C
s
Yrs
If the
S8AS will switch to Setting Mode if the
• You cannot switch to Setting Mode if using models that do not
°C
s
Yrs
allow changes to settings (S8AS-24006N/48008N).
If the
S8AS will switch to Test Mode if the
°C
s
Yrs
Press the
The flashing "OFF" display indicates that the S8AS is ready to dis-
connect branch output 1.
Pressing the
f f
°C
s
Yrs
5 6
Key is pressed, SET will be displayed. At this point, the
Key is pressed, TST will be displayed. At this point, the
Key to change to Test Mode.
Key at this point will disconnect branch output 1.
Section 5-1
Key is pressed.
Key is pressed.
79