Component Names and Functions
2-1
Component Names and Functions
Component Names
1. AC input terminals
2. Protective earth (PE) terminal
6. Output indicator (DC ON)
7. Output voltage adjuster (V.ADJ)
5. I/O signal terminals
1. AC input terminals
2. Protective earth (PE) terminal
6. Output indicator (DC ON)
7. Output voltage adjuster (V.ADJ)
5. I/O signal terminals
16
■ 240-W Output Models
■ 480-W Output Models
9. Branch output indicators
(1) AC Input Terminals (L and N) and (2) Protective Earth (PE) Terminal
Connect the input power supply (100 to 240 VAC, 50/60 Hz) (commercial
power) to the Power Supply.
Do not connect an inverter output as the power supply.
Make sure that the protective earth (PE) terminal is connected to ground to
prevent electric shock or malfunction.
L
N
100 to 240 VAC,
50/60 Hz
(3) Positive (+) and (4) Negative (−) Branch Output Terminals
Connect to each branch output. Positive and negative branch outputs are con-
nected to separate terminal blocks with two positive and two negative termi-
nals for each branch output.
13. Communications terminals
9. Branch output indicators
8. Seven-segment display
10. Unit indicators
11. Status indicators
12. Operation keys
3. Branch output terminals (+)
4. Branch output terminals (−)
(The terminal screws are M4.)
Section 2-1
13. Communications terminals
8. Seven-segment display
10. Unit indicators
11. Status indicators
12. Operation keys
3. Branch output terminals (+)
4. Branch output terminals (−)