Omron S8AS User Manual page 92

Special Settings and Communications Settings
Parity Setting: PTY (Parity Bit)
p t y
Switch to the
Send Wait
Time Setting
(SWT).
74
The Parity Setting (PTY) will be displayed if the Up (SEL) Key (
from the Stop Bit Setting Display (BIT).
This parameter sets the parity to none, even, or odd.
e V n
o d d
n o n
(Returns to PTY display.)
Press the Key to display the parity setting.
The setting can be changed by pressing the
Keys.
Evn: Even
odd: Odd
non: None
Change the setting with the
• The S8AS will automatically return to the TMP dis-
play if no key is pressed within 3 s.
Change the setting with the
When the Key is pressed, the setting will flash.
When the flashing stops, the new setting will be saved
and the S8AS will return to the PTY display.
If you want to confirm the new setting, press the
Key again from the PTY display.
Section 4-7
) is pressed
and
or Key.
or Key.