Table of Contents
Advertisement
Special Settings and Communications Settings
Baud Rate: BPS (Bits Per Second)
b p s
Switch to the
data length
setting (LEN).
The Baud Rate Setting (BPS) will be displayed if the Up (SEL) Key (
pressed from the Unit Number Setting Display (UNO).
This parameter sets the RS485 port's baud rate to 4,800 bps or 9,600 bps.
9 6
4 8
(Returns to BPS display.)
Press the
Key to display the baud rate setting. The set-
ting can be changed by pressing the
96: 9,600 bps
48: 4,800 bps
Change the setting with the
• The S8AS will automatically return to the BPS display if
no key is pressed within 3 s.
When the
Key is pressed, the setting will flash. When
the flashing stops, the new setting will be saved and the
S8AS will return to the "BPS" display.
If you want to confirm the new setting, press the
again from the BPS display.
Section 4-7
) is
or
Key.
or
Key.
Key
71
Hide quick links:
Advertisement
Table of Contents
