Omron S8AS User Manual page 44

Specifications
Item
Func- Over-tempera-
tions ture detection
function
Display func-
tions
External Tripping Input
Startup sequence
Shutdown sequence
Communications
Sampling period
Parallel connection
Series connection
26
Model S8AS-48008
Over-tem- Setting range: 25 to 90°C
perature (in 1°C increments)
threshold
Over-tem- Photoswitch output
perature
30 VDC max. and 50 mA max., Leakage current: 0.1 mA max.,
output
Residual voltage: 2 V max.
Output volt- Display range: 17.0 to 30.0 V
age
Display accuracy: 2% rdg ±1 digit max.
display
Output cur- Branch output display range: 0.0 to 4.0 A
rent display
Peak output current display range: 0.0 to 20.0 A
Total current display range: 0.0 to 40.0 A
Display accuracy: 5% FS (4 A) ±1 digit max.
Mainte- Display range: FUL (Full)/HLF (Half)/0.0 to 5.0 yr
nance fore-
cast monitor
display
Display range: −20 to 100°C
Tempera-
ture display
Display accuracy: 2°C ±1 digit max.
The input can be enabled
or disabled for each
branch output.
19.2 to 30 VDC, minimum
signal width: 10 ms,
tripping after input within
20 ms + the shutdown
sequence set time
Setting range: 0.0 to
99.9 s in 0.1-s increments
Setting range: 0.0 to
99.9 s in 0.1-s increments
Not supported
1 ms
Not supported.
Not supported.
S8AS-48008N
90°C (Cannot be
changed.)
All branch outputs:
Enabled (Cannot be
changed.)
19.2 to 30 VDC, minimum
signal width: 10 ms,
tripping after input within
20 ms + the shutdown
sequence set time
Branch output 1: 0.0 s
(Cannot be changed.)
Branch output 2: 0.4 s
(Cannot be changed.)
Branch output 3: 0.8 s
(Cannot be changed.)
Branch output 4: 1.2 s
(Cannot be changed.)
Branch output 5: 1.6 s
(Cannot be changed.)
Branch output 6: 2.0 s
(Cannot be changed.)
Branch output 7: 2.4 s
(Cannot be changed.)
Branch output 8: 2.8 s
(Cannot be changed.)
All branch outputs:
0.0 s (Cannot be
changed.)
Section 2-3
S8AS-48008R
Setting range: 25 to 90°C
(in 1°C increments)
The input can be enabled
or disabled for each
branch output.
19.2 to 30 VDC, minimum
signal width: 10 ms,
tripping after input within
20 ms + the shutdown
sequence set time
Setting range: 0.0 to
99.9 s in 0.1-s incre-
ments
Setting range: 0.0 to
99.9 s in 0.1-s incre-
ments
Supported (RS-485)