Configuring The Global Directory; Configuring The Directory Server Settings - Polycom V500 Administrator's Manual

Administrator's Guide for the V500 System

Configuring the Global Directory

Configuring the Directory Server Settings

3 - 16
If you use the Polycom Global Management System, you can configure your
system to use the Global Directory. The Global Directory provides a list of other
systems that are registered with the Global Directory Server and are available for
calls. The other systems appear in the Directory, allowing you to place calls to other
users by selecting their names.
To configure the Directory Server settings:
1. Go to System > Admin Settings > Global Services > Directory Servers.
2. Configure these settings:
Setting Description
Global Directory Specifies the IP address or DNS address of the Global Directory
(GDS) Server. You can enter up to five addresses.
Register Registers this system with the Global Directory Server.
Password Lets you enter the Global Directory password, if there is one.
Display Global Displays other registered systems in the Global Directory.
Addresses
Display Name in Specifies whether to display the system's name in the Global
Global Directory Directories of other registered systems.
Save Global Copies the Global Directory to this local system.
Directory to System
www.polycom.com/videodocumentation